Sampson Radiance Oil Modified Waterborne Hardwood Floor Finish
Great Coverage With Easy Application
Sampson Radiance is a waterborne finish that gives a rich traditional oil look with no catalyst or cross linker needed. It is quick drying for fast recoating, features enhanced durability with excellent film build, and is recommended for commercial and residential applications.
BRAND
APPLICATION
BASE
- Rich Traditional Oil Look
- No Catalyst Or Cross Linker Needed
- Enhanced Durability With Excellent Film Build
- Low Odor And Low VOC
- Available In High Gloss, Semi Gloss And Satin, In 1 Gallon And 5 Gallon Sizes
| Item Number | Size | Sheen | VOC | Coverage Rate | Dry Time |
|---|
| HC6200GAL | 1 Gal | High Gloss | 275 | 450 sq ft/gal | 2-3 Hrs |
| HC62005G | 5 Gal | High Gloss | 275 | 450 sq ft/gal | 2-3 Hrs |
| HC6201GAL | 1 Gal | Semi Gloss | 275 | 450 sq ft/gal | 2-3 Hrs |
| HC62015G | 5 Gal | Semi Gloss | 275 | 450 sq ft/gal | 2-3 Hrs |
| HC6202GAL | 1 Gal | Satin | 275 | 450 sq ft/gal | 2-3 Hrs |
| HC62025G | 5 Gal | Satin | 275 | 450 sq ft/gal | 2-3 Hrs |
Sampson Radiance Oil Modified Waterborne Hardwood Floor Finish – High Gloss
Sampson Radiance Oil Modified Waterborne Hardwood Floor Finish – Semi Gloss
Sampson Radiance Oil Modified Waterborne Hardwood Floor Finish – Satin
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
WARNING. Contains N-Methyl-2-Pyrrolidone, Vapor Harmful. May affect the brain or nervous system causing dizziness, headaches or nausea. May be fatal if swallowed or inhaled. Causes moderate eye irritation. Harmful if absorbed through skin. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Use only with adequate ventilation. Do not breathe vapors, spray mist, dust or chips from sanding. Avoid contact with skin, eyes or clothing. While spraying paint, or sanding surface, wear a mask or pesticide respirator approved by the National Institute for Occupational Safety and Health. Wear protective clothing (long sleeved cotton shirt, long pants, hat, gloves (such as nitril or butyl). Shoes and socks. Wash thoroughly with soap and water after handling and before eating, drinking, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse. Use adequate ventilation.
Follow manufacturer’s instructions for cleaning/maintaining Personal Protection Equipment (PPE). If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
FIRST AID
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Call a poison control center or doctor for treatment advice.
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Never give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth to mouth, if possible. Call a poison control center or doctor immediately for further treatment advice. For additional information in case of emergency call toll free Chemtrec – 1-800-424-9300. Have the product container or label with you when calling a poison control center or doctor or going for treatment.
PHYSICAL AND CHEMICAL HAZARDS (STORAGE)
WARNING: This product can expose you to 1-methyl-2-pyrrolidone. Which is known to the state of California to cause birth defects or other reproductive Harm – www.P65Warnings.ca.gov.
KEEP FROM FREEZING. DO NOT THIN.
Spill: Absorb with inert and dispose of as specified under “Clean Up”.
Clean Up: Soap and Water
Disposal: Empty containers may retain residue. Follow label warnings even after the container is emptied. To dispose of contaminated absorbent, container and unused contents contact your sanitation department or State-designated environmental agency.
Refer to Safety Date Sheet for additional health and safety information.
KEEP OUT OF THE REACH OF CHILDREN
SURFACE PREPARATION: New Wood or Newly Sanded Floors: Make several passes with the sandpaper, increasing the paper fineness with each pass. The final pass before application of polyurethane finish should be with a 100 grit screen disc or sandpaper. Remove dust completely by sweeping, vacuuming and wiping the floor with a lint free cloth lightly dampened with tacking solution or water. The floor and room temperature should be at least 65 degrees F.
WARNING! IF YOU SCRAPE, SAND OR REMOVE OLD PAINT, YOU MAY RELEASE LEAD DUST. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
APPLICATION: Apply polyurethane finish with a 3/8” lint-free roller, synthetic pad, T-bar or brush going with the grain of the wood. For best results, apply 2 coats of polyurethane finish at the rate of 500 square feet per gallon over 1 coat of Sampson Seal Kote Universal Sealer. Follow dry time instructions for Seal Kote before applying polyurethane finish. Screen the floors with a 150 grit screen disc or 180 grit sandpaper between coats. Remember to vacuum and tack thoroughly after screening to remove all dust. Stir thoroughly before and during use. Do not shake container as this will create air bubbles.
Where possible remove old varnish, shellac, lacquer, etc. Sand surface smooth with 180 grit screen. Flow on a uniform even coat of polyurethane finish. Polyurethane finish dries in about 2 – 3 hours and may be re-coated in 4 – 6 hours. However, if polyurethane finish is allowed to dry more than 24 hours, due to its super hardness, it’s important that polyurethane finish be scuffed with 180 grit sandpaper to dull surface before applying subsequent coats. This product is designed to be used directly from the can without thinning under normal environmental and application conditions. Keep can closed when not in use.
Re-Coating Procedures For Previously Sealed or Finished Wood Floors
- All wax, grease, soaps and dirt must be removed thoroughly.
- Screen lightly with a 150 grit screen between coats of polyurethane.
- Vacuum up all dust possible then tack floor with a clean dampened towel.
- Apply MINIMUM of two coats of polyurethane finish in the manner described above.
INGREDIENTS: Oil-Modified Urethane (Proprietary), N-Methyl-2-Pyrrilidone (872-50-4), Propylene Glycol (57-55-6), Triethylamine (121-44-8).
MAXIMUM VOC CONTENT: 275 grams/liter
