Absco Swedish Finish for Pros
Acid-Cured Finish Provides Unique Depth of Beauty
Absco Swedish Finish for Pros is a two component, acid-cured clear finish that provides unique depth of beauty with long-term durability. It has a two hour dry time with no sealer required and is great for high traffic commercial and residential use.
BRAND
APPLICATION
BASE
- Two-Component, acid-cured
- Provides a unique depth of beauty with long-term durability
- Great for high traffic commercial and residential use
- Two-hour dry time, no sealer required
- Available In Super Matte, Matte and Semi-Gloss Finishes, In 2.5 And Five Gallon Sizes
| Item Number | Size | Sheen | VOC | Coverage Rate | Dry Time |
|---|---|---|---|---|---|
| PR16300008 | 16 Oz | 16 Oz Catalyst | |||
| PR16300016 | 8 Oz | 8 Oz Catalyst | |||
| PR16306203 | 2.5 Gal | Super Matte | 545 | 400 sq ft/gal | 2-3 Hrs |
| PR16306205 | 5 Gal | Super Matte | 545 | 400 sq ft/gal | 2-3 Hrs |
| PR16306403 | 2.5 Gal | Matte | 545 | 400 sq ft/gal | 2-3 Hrs |
| PR16306405 | 5 Gal | Matte | 545 | 400 sq ft/gal | 2-3 Hrs |
| PR16306503 | 2.5 Gal | Semi-Gloss | 545 | 400 sq ft/gal | 2-3 Hrs |
| PR16306505 | 5 Gal | Semi-Gloss | 545 | 400 sq ft/gal | 2-3 Hrs |
| PR163068 | 1 Gal | Retarder |
Absco Swedish Finish For Pros Retarder
Absco Swedish Finish For Pros Catalyst
Absco Swedish Finish For Pros – Super Matte
ABSCO SWEDISH FINISH FOR PROS
Absco Swedish Finish is a two-component, alcohol-based finish designed for use in high-traffic residential and commercial areas. Absco Swedish Finish is simple to apply and dries quickly (1 to 2 hours). In most applications only two coats are required; therefore, your floor finishing job can be easily completed in one day. Absco Swedish Finish is available in Super Matte, Matte and Semi-Gloss levels. Absco Swedish Crown can be used as a topcoat over Absco Swedish Finish after a 24 hour dry time. *See Absco Swedish Crown label for directions.
IMPORTANT: Carefully read all label wording on finish, lacquer thinner and/or denatured alcohol labels, as well as hardener containers.
SURFACE PREPARATION: Prepare the floor according to NWFA/NOFMA specifications. Natural finished floors should not be sanded finer than 100 grit sandpaper or screen. For stained floors: Sand and edge with 100 grit sandpaper then hand sand edges using 60 or 80 grit sandpaper. Vacuum the entire floor, as well as the adjoining areas. Floors can be tacked with a dry cotton cloth.
WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NOISH-approved respirator to control lead exposure. Clean up carefully with HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.com.
RE-COATING EXISTING FLOORS: Only recoat floors that have been previously coated with Absco Swedish Finish. All previous finishes, oils, wax, and other contaminants must be removed completely by sanding to bare wood. If sanding is necessary, trowel fill cracks in old floors to minimize possible contamination of the finish. Block off any direct sources of sunlight hitting the floor. Prior to applying Absco Swedish Finish, turn off all ignition sources including pilot lights, heaters, fans, and electrical equipment. Ventilate work and adjacent areas to prevent vapor build up. Vapors may travel and collect in confined and low areas such as basements. Use only in well-ventilated areas. Always wear a NIOSH/MSHA respirator approved for use with organic solvent vapors. DO NOT EAT, DRINK, OR SMOKE during application. DO NOT store in unlabeled bottles or other containers.
STAINING: Follow stain instructions and allow adequate drying time.
MIXING: Stir or shake well before adding Super Hardener to disperse finish evenly. Inspect bottom of container to ensure that all Finish is dispersed. Pour into an appropriate clean plastic application container. Slowly add Super Hardener from the graduated hardener container while stirring Absco Swedish Finish. If the correct amount of Super Hardener is not added, the Absco Swedish Finish will not cure. Stir in hardener for 60 seconds. Allow to stand for 5 to 10 minutes before applying. Stir occasionally during application. Mix enough product for only one coat.
APPLICATION: Absco Swedish Finish may be applied using a natural bristle brush, lambs wool applicator or short nap lambs wool roller. Apply at the rate of 300 to 400 square feet per gallon with brush or lambs wool at a rate of 450 to 550 square feet with the roller. For best results, the product and the room temperature should be between 60°F and 80°F during application and drying. Apply Absco Swedish Finish from wall to wall following the grain of the wood, being careful not overwork the product always keeping a wet edge. Absco Retarder may be added to aid in the open time and flow if necessary. When dry to touch ventilate rooms to maintain the best air quality in the structure. When dry, screen with a used screen 100 grit or finer. Hand sand all areas not reached by machine. Vacuum floor thoroughly and tack with a cloth dampened with denatured alcohol or lacquer thinner* or water. Provide adequate ventilation during the tacking process. Apply second coat in the same manner as the first coat. Additional coats may be applied for more protection. Do not apply more than 2 coats in 24 hours.
*Tacking: DO NOT use commercially prepared tack cloths or cloths dampened with mineral spirits or paint thinner.
MAINTENANCE: Clean floor regularly by vacuuming to remove grit. Clean as needed with floor cleaner – follow label directions.
- Do not use cleaning products for two weeks.
CLEAN UP: Clean applicators with lacquer thinner upon completion.
TIPS:
- Allow finish to dry for at least 2 hours between coats.
- DO NOT apply below 60°F and above 90°F.
- Test product on unfamiliar species of wood before use.
- Keep containers closed when not in use.
- Never add additional Super Hardener.
- DO NOT use mineral spirits, paint thinner, or commercially prepared tack cloth.
- Allow two weeks before covering floors.
- Always use felt floor protector on all furniture.
- Wait overnight before allowing light traffic on final coat.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
DANGER. Highly Flammable liquid and Vapor, Contains Petroleum distillates, Ethanol, Methanol, Toluene, Formaldehyde. Toxic if swallowed. May be fatal if swallowed and enters airways. Causes serious eye damage. May cause an allergic skin reaction. Causes respiratory irritation. May cause skin irritation. May cause cancer. May cause damage to organs. Suspected of damaging fertility or the unborn child. May cause drowsiness and dizziness. May be corrosive to metals. Do not breathe vapors, spray mist, dust or chips from sanding. Avoid contact with skin, eyes or clothing. While spraying paint, or sanding surface, wear a mask or respirator approved by the National Institute for Occupational Safety and Health. Wear protective clothing (long sleeved cotton shirt, long pants, hat, gloves (such as nitril or butyl). Shoes and socks. Wash thoroughly with soap and water after handling and before eating, drinking, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse. Use adequate ventilation. Prevent build-up of the vapors by opening all windows and doors to achieve cross-ventilation.
Reports have associated repeated and prolonged exposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Follow manufacturer’s instructions for cleaning/maintaining Personal Protection Equipment (PPE). If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
FIRST AID
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Call a poison control center or doctor for treatment advice.
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Never give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth to mouth, if possible. Call a poison control center or doctor immediately for further treatment advice. For additional information in case of emergency call toll free Chemtrec – 1-800-424-9300. Have the product container or label with you when calling a poison control center or doctor or going for treatment.
PHYSICAL AND CHEMICAL HAZARDS (STORAGE)
Do not use or store near heat, sparks or open flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Keep container close when not in use. Store in cool, dry, well-ventilated place. Store away from incompatible materials.
WARNING: This product can expose you to Methanol and Toluene, which is known to the state of California to cause birth defects. This product can expose you to Formaldehyde, which is known to the state of California to cause Cancer – www.P65Warnings.ca.gov.
Spill: Absorb with inert and dispose of as specified under “Clean Up”.
Clean Up: Lacquer Thinner. To avoid spontaneous combustion, soak soiled rags and waste immediately after use in water-filled, closed metal container.
IMPORTANT STORAGE AND DISPOSAL-DANGER! Rags, steel wool or waste soaked with the product may spontaneously catch fire if improperly discarded. Immediately after use place the rags, steel wool or waste in sealed water-filled metal container. Do not store unused product inside the home.
Disposal: This product contains organic solvents which may cause adverse effects to the environment if handled improperly. Empty containers may retain residue. Follow label warnings even after the container is emptied. Residual vapor may explode on ignition. For disposal guidance, contact your sanitation department or State-designated environmental agency.
Refer to Safety Date Sheet for additional health and safety information.
KEEP OUT OF THE REACH OF CHILDREN
WARRANTY – Absco does not in any way warrant the merchantability or fitness of this product for any purpose, or provide any other warranty, expressed or implied. Any liability whatsoever of Absco is limited to the replacement of product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, occurring because of improper application.
DANGER, HIGHLY FLAMMABLE LIQUID AND VAPOR, HARMFUL OR FATAL IF SWALLOWED, CALL PHYSICIAN IMMEDIATELY, HARMFUL VAPOR, SKIN AND EYE IRRITANT.
