Absco Pro Select Polyurethane Floor Finish
Professional Polyurethane Great For All Hardwoods
Absco Pro Select Polyurethane Floor Finish is a traditional oil formulation that has easy application, overnight dry times and a low-ambering finish. It is available in a 550 VOC formula and is ideal for new installation, stained wood, screen & recoat jobs or natural wood.
BRAND
APPLICATION
BASE
- Beautifies and Protects
- 550 VOC low-ambering formulation
- Ideal for new installation, stained wood, screen & recoat jobs or natural wood
- Available In Super High Gloss, Semi-Gloss And Satin Finishes, In Quart, One And Five Gallon Sizes
| Item Number | Size | Sheen | VOC | Coverage Rate | Dry Time |
|---|---|---|---|---|---|
| 27001 | 1 Gal | Gloss | 550 | 500 sq ft/gal | 4-6 Hrs |
| 27004 | Qt | Gloss | 550 | 500 sq ft/gal | 4-6 Hrs |
| 27005 | 5 Gal | Gloss | 550 | 500 sq ft/gal | 4-6 Hrs |
| 27011 | 1 Gal | Satin | 550 | 500 sq ft/gal | 4-6 Hrs |
| 27014 | Qt | Satin | 550 | 500 sq ft/gal | 4-6 Hrs |
| 27015 | 5 Gal | Satin | 550 | 500 sq ft/gal | 4-6 Hrs |
| 27021 | 1 Gal | Semi-Gloss | 550 | 500 sq ft/gal | 4-6 Hrs |
| 27024 | Qt | Semi-Gloss | 550 | 500 sq ft/gal | 4-6 Hrs |
| 27025 | 5 Gal | Semi-Gloss | 550 | 500 sq ft/gal | 4-6 Hrs |
Absco Pro Select Polyurethane Floor Finish – Satin
ABSCO is the #1 choice for high quality floor finishes for wood. Manufactured from the highest quality ingredients available today, PRO SELECT will provide many years of beauty and durability on all wood floor applications. PRO SELECT will not chip or wear and applies easily, leaving a beautiful “like new” finish.
SURFACE PREPARATION: New Wood or Newly Sanded Floors: Prepare the floor according to the NWFA or NOFMA accepted manner. Make several passes with the sandpaper, increasing the paper fineness with each pass. The final pass before application of PRO SELECT should be with a #100 grit screen disc or sandpaper. Remove dust completely by sweeping, vacuuming, and wiping the floor with a lint free cloth lightly dampened with mineral spirits. The floor and room temperature should be at least 65 degrees F.
SURFACE PREPARATION: Previously Finished Floors: Remove old finish in poor condition completely. All wax, grease, soaps, and dirt must be removed thoroughly. For floors in good condition, screen the floor with #120 to #150 Screen disc, or #180 grit sandpaper. Remove dust completely by sweeping, vacuuming, and wiping the floor with a lint free cloth lightly dampened with mineral spirits.
WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
APPLICATION: Apply PRO SELECT with a roller, lamb’s wool applicator, brush, or T-bar going with the grain of the wood. For best results, apply 2 coats of PRO SELECT polyurethane over 1 coat of Absco SealGuard or universal sealer. Stir Satin and Semi-Gloss Finish well prior to and during application. Do not shake container as this will create air bubbles. For maximum durability, PRO SELECT should be applied to raw wood since the finish coat will only be as durable as the undercoat. Flow on a uniform, even coat of PRO SELECT. PRO SELECT dries in about 4-6 hrs., depending upon airflow, and may be re-coated after 12 hrs. This product is designed to be used directly from the can without thinning under normal environmental and application conditions. Keep can closed when not in use.
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
WARNING: May be fatal if swallowed or inhaled. Causes moderate eye irritation. Harmful if absorbed through skin. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Do not breathe vapors, spray mist, dust, or chips from sanding. Avoid contact with skin, eyes, or clothing. While spraying paint, or sanding surface, wear a mask or pesticide respirator jointly approved by the Mine Safety and Health Administration and the National Institute for Occupational Safety and Health. Wear protective clothing (long sleeved cotton shirt, long pants, hat, gloves, such as nitril or butyl shoes) and socks. Wash thoroughly with soap and water after handling and before eating, drinking, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse. Use adequate ventilation. Reports have associated repeated and prolonged exposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Follow manufacturer’s instructions for cleaning/maintaining Personal Protection Equipment (PPE). If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
FIRST AID:
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Call a poison control center or doctor for treatment advice.
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Never give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth to mouth, if possible. Call a poison control center of doctor immediately for further treatment advice. For additional information in case of emergency call toll free Chemtrec – 1-800-424-9300. Have the product container or label with you when calling a poison control center or doctor or going for treatment.
PHYSICAL AND CHEMICAL HAZARDS (STORAGE)
Do not use or store near heat, sparks, or open flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors, and other sources of ignition during use and until all vapors are gone.
KEEP OUT OF THE REACH OF CHILDREN
Coverage: 500 Sq. Ft./Gal
MAXIMUM VOC CONTENT: 550 GRAMS/LITER
