PoloPlaz 1K Waterborne Finish
Polo1K is a unique single component clear waterborne finish designed for extreme durability and ease of use. It offers exceptional resistance to abrasion, wear, scuffs and many common liquids and chemicals. Its rapidcure technology allows your customers full use of their floor in just 24 hours!
Virtually odorless and has a VOC content low enough to use anywhere and on any job…including LEED projects!
BRAND
APPLICATION
BASE
Use For:
- Basketball courts, dance floors, gyms, stages, etc.
- High profile courts, discriminating architects
- New installation, resand, or screen/recoat
Available In 1 Gallon And 5 Gallon Containers. Flat 3.5” Available In 1 Gallons
| VOC | 275 gr/L |
| Solids | 30% |
| Flash Point | n/a |
| Cure Time (95%) | 24 hours – Full Cure 7 days |
| Coverage | 450-500 sq ft/gal |
| Color | clear |
| Available In | 1g & 5g Containers. Flat 3.5˚ 1g Containers |
| Sheens | Gloss, Semi-gloss, Satin, Matte, Flat 3.5˚ |
PoloPlaz Polo 1K Waterborne Finish – Gloss
PoloPlaz Polo 1K Waterborne Finish – Semi Gloss, Satin, Matte
PREPARATION:
For new floors, abrade NSB seal coat with 180 grit screens or 3M SPP with 180 discs. Tack with towels lightly dampened with water. For screen and coats, first clean entire floor with Craftsman’s Choice Tie Tack and then abrade and tack as mentioned above.
APPLICATION:
Eliminate direct air drafts on floor during application. Apply with a lightweight T-bar @ 450-500 sf/gal. Increase airflow when film has become tack free. Wait 4-6 hours before next coat (under normal conditions: 65-80°F and 40-60% RH).
High humidity and cooler temperatures may extend dry times. If more than 15 hours have elapsed between coats, the floor must be abraded before next coat. Generally, two coats of NSB and one coat of finish will provide adequate protection for new floors. However, use your professional discretion to achieve desired results.
MAINTENANCE and CLEANUP:
For daily cleaning, dust mop with Craftsman’s Choice Hardwood Floor Cleaner. Follow directions that accompany the cleaner. Tools may be cleaned with water.
GUARANTEE
We guarantee this PoloPlaz product to perform as advertised when applied in accordance with industry standards. Because surface preparation, application methods, and surface conditions are beyond our control, all express and implied warranties are explicitly excluded. Responsibility for claim of any kind is limited to product replacement only.
DANGER
HAZARD STATEMENTS:
Causes skin irritation
Causes serious eye irritation
May damage fertility or the unborn child
May cause respiratory irritation
Harmful if swallowed
May cause drowsiness or dizziness
PRECAUTIONARY STATEMENTS:
Keep out of reach of children
Read label before use
Obtain special instructions before use
Avoid breathing fume/dust/mist/vapors/spray
If exposed or concerned: Get medical advice/attention
Wear protective gloves/protective clothing/eye protection
Use only outside or in a well-ventilated area
Do not eat, drink, or smoke when using this product
Wash hands thoroughly after handling
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulation
Do not handle until all safety precautions have been read and understood
FIRST AID:
IF ON SKIN: Wash with plenty of soap and water
IF SKIN IRRITATION PERSISTS: Get medical advice/attention
Take off contaminated clothing and wash before reuse
IF INHALED: Remove person to fresh air and keep comfortable for breathing
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing
If eye irritation persists: Get medical advice/attention
Call a poison center/doctor/if you feel unwell
V.O.C < 275 g/l.
