Sampson Poly-U-Var Premium Urethane Clear Wood Finish
Superior Results For The Toughest Floors
Sampson Poly-U-Var Premium Urethane is an extremely durable varnish recommended for interior residential or commercial floors, paneling, cabinets, doors, trim, furniture, bar tops, etc. It is superior to conventional urethanes in toughness, resistance to abrasion and resistance to water and chemicals such as cleaners.
BRAND
APPLICATION
BASE
- Superior Abrasion Resistance
- Exceptional Flow and Leveling
- High Build
- Low Odor
- Available in 550 VOC formulation
- Available in Gloss, Satin, and Semi Gloss finishes, in quart, 1 gallon and 5 gallon sizes
| Item Number | Size | Sheen | VOC | Coverage Rate | Dry Time |
|---|---|---|---|---|---|
| SC02092301 | 1 Gal | Satin | 550 | 400 sq ft/gal | 4-6 Hrs |
| SC02092304 | Qt | Satin | 550 | 400 sq ft/gal | 4-6 Hrs |
| SC02092305 | 5 Gal | Satin | 550 | 400 sq ft/gal | 4-6 Hrs |
| SC02092401 | 1 Gal | Gloss | 550 | 400 sq ft/gal | 4-6 Hrs |
| SC02092404 | Qt | Gloss | 550 | 400 sq ft/gal | 4-6 Hrs |
| SC02092405 | 5 Gal | Gloss | 550 | 400 sq ft/gal | 4-6 Hrs |
| SC02092501 | 1 Gal | Semi Gloss | 550 | 400 sq ft/gal | 4-6 Hrs |
| SC02092504 | Qt | Semi Gloss | 550 | 400 sq ft/gal | 4-6 Hrs |
| SC02092505 | 5 Gal | Semi Gloss | 550 | 400 sq ft/gal | 4-6 Hrs |
Sampson Poly-U-Var Premium Urethane Clear Wood Finish – Gloss
Sampson Poly-U-Var Premium Urethane Clear Wood Finish – Semi Gloss
Sampson Poly-U-Var Premium Urethane Clear Wood Finish – Satin
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
DANGER. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Causes eye irritation and serious eye damage. Causes skin irritation. Harmful if absorbed through skin or inhaled. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Do not breathe vapors, spray mist, dust or chips from sanding. Avoid contact with skin, eyes or clothing. While spraying paint, or sanding surface, wear a mask or respirator approved by the National Institute for Occupational Safety and Health. Wear protective clothing (long sleeved cotton shirt, long pants, hat, gloves (such as nitril or butyl). Shoes and socks. Wash thoroughly with soap and water after handling and before eating, drinking, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse. Use adequate ventilation.
Reports have associated repeated and prolonged exposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Follow manufacturer’s instructions for cleaning/maintaining Personal Protection Equipment (PPE). If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
FIRST AID
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Call a poison control center or doctor for treatment advice.
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Never give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately
with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth to mouth, if possible. Call a poison control center or doctor immediately for further treatment advice. For additional information in case of emergency call toll free Chemtrec – 1-800-424-9300. Have the product container or label with you when calling a poison control center or doctor or going for treatment.
PHYSICAL AND CHEMICAL HAZARDS (STORAGE)
Do not use or store near heat, sparks or open flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone.
Spill: Absorb with inert and dispose of as specified under “Clean Up”.
Clean Up: Mineral Spirits. To avoid spontaneous combustion, soak soiled rags and waste immediately after use in water-filled, closed metal container.
IMPORTANT STORAGE AND DISPOSAL-DANGER! Rags, steel wool or waste soaked with the product may spontaneously catch fire if improperly discarded. Immediately after use place the rags, steel wool or waste in sealed water-filled metal container. Do not store unused product inside the home.
Disposal: This product contains organic solvents which may cause adverse effects to the environment if handled improperly. Empty containers may retain residue. Follow label warnings even after the container is emptied. Residual vapor may explode on ignition. For disposal guidance, contact your sanitation department or State-designated environmental agency.
Refer to Safety Date Sheet for additional health and safety information.
KEEP OUT OF THE REACH OF CHILDREN
SURFACE PREPARATION: New Wood or Newly Sanded Floors: Make several passes with the sandpaper, increasing the paper fineness with each pass. The final pass before application of polyurethane finish should be with a 100 grit screen disc or sandpaper. Remove dust completely by sweeping, vacuuming and wiping the floor with a lint free cloth lightly dampened with mineral spirits. The floor and room temperature should be at least 65 degrees F.
WARNING! IF YOU SCRAPE, SAND OR REMOVE OLD PAINT, YOU MAY RELEASE LEAD DUST. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
APPLICATION: Apply polyurethane finish with a roller, lambswool applicator, T-bar or brush going with the grain of the wood. For best results, apply 2 coats of polyurethane finish at the rate of 500 square feet per gallon over 1 coat of Sampson Seal Kote Universal Sealer. Follow dry time instructions for Seal Kote before applying polyurethane finish. Screen the floors with a 150 grit screen disc or 180 grit sandpaper between coats. Remember to vacuum and tack thoroughly after screening to remove all dust. Stir thoroughly before and during use. Do not shake container as this will create air bubbles.
For maximum durability, polyurethane finish should be applied to raw wood since the finish coat will only be as durable as the undercoat. Where possible remove old varnish, shellac, lacquer, etc. Sand surface smooth with 180 grit screen. Flow on a uniform even coat of polyurethane finish. Polyurethane finish dries in about 4 – 6 hours and may be re-coated in 8 – 10 hours. However, if polyurethane finish is allowed to dry more than 48 hours, due to its super hardness, it’s important that polyurethane finish be scuffed with 180 grit sandpaper to dull surface before applying subsequent coats. This product is designed to be used directly from the can without thinning under normal environmental and application conditions. Keep can closed when not in use.
Re-Coating Procedures For Previously Sealed or Finished Wood Floors
- All wax, grease, soaps and dirt must be removed thoroughly.
- Screen lightly with a 150 grit screen between coats of polyurethane.
- Vacuum up all dust possible then tack floor with a clean dampened towel.
- Apply MINIMUM of two coats of polyurethane finish in the manner described above.
INGREDIENTS: Oil-Modified Urethane (Proprietary), Distillates (Petroleum), hydrotreated light (64742-47-8), Methyl Ethyl Ketoxime (96-29-7), Hydrocarbon and Paraffin Waxes (Confidential), 2-Ethylhexanoic acid, Manganese Salt (15956-58-8).
MAXIMUM VOC CONTENT: 550 grams/liter
