PoloPlaz Fast Break Paint
The only game line paint designed specifically for gym floors.
Fast Break is an oil-based game line and graphic arts paint for horizontal surfaces, specifically designed to be used with PoloPlaz World Class Finish and Seal, World Class 450, Magnum Low VOC, and NSB Sealer. This is not pre-packaged wall paint. Fast Break paints are made to perform on sports floors and provide excellent adhesion to the topcoat. We manufacture our own paints and have the fastest shipping in the industry. Our team will even match custom colors and ship directly to the job site.
BRAND
APPLICATION
BASE
Features:
- Because of the high urethane content, Fast Break Paint dries like a finish , eliminating costly drying delays.
- With its high pigment concentration, Fast Break Paint provides excellent coverage (hide) in most cases.
- Excellent hardness and low viscosity, Fast Break Paint will apply evenly and dry to a thin film.
- Allows for “breaking” at the cracks to reduce chipping and peeling.
Application
- Screen floor with 120 or 150 grit.
- Tack with water and allow to dry.
- Tape lines.
- Apply paint at 500 sf/gal.
- Peel tape and allow edges to dry.
- Abrade and apply top coats.
Formulation:
- Solids: 67% – 70%
- VOC’s: <450 g/L
- Flash Point: > 101 F
- Solvent: Petroleum Distillates
- Shelf Life: 6 Months Maximum
Tips:
- Apply with brush or 1/4 inch nap roller.
- Control temperature and humidity in facility to avoid excessive wood movement.
1 Quart, 1 Gallon And 5 Gallon Containers
All colors shown are approximations. Final results may vary. For exact color matches, please contact us.
| VOC | 450 gr/L |
| Solids | 69% |
| % Volatile | n/a |
| Flash Point | 105F |
| Dry Time | 12 hours |
| Cure Time | n/a |
| Coverage | 500 sq ft/gal |
| Open Time | 10 min |
| Sward Hardness | n/a |
| Color | varies |
DISPOSAL: Rags, steel wool and other waste soaked with oil finishes may spontaneously catch fire if improperly discarded. Dispose of rags and waste products in a sealed metal container or in accordance with local government and fire regulations. To avoid spontaneous combustion, do not allow dust from abraded or sanded floors to accumulate in piles, trash cans, vacuum cleaners, etc. Never leave dust or shavings in any other container inside a facility overnight.
STORAGE: Store at room temperature. Do not store above 120˚ F. Protect from freezing. If frozen, thaw at room temperature without stirring, and then stir before using. Keep container in upright position and tightly closed when storing.
PREPARATION: Ensure sealer has completely dried, thoroughly abraded, and free of dust and debris. Tape game lines using 3M #2090 for curved lines and #2080 for straight lines. Roll tape well to prevent bleed under.
Stir paint well and mix all same colors together for color consistency.
PAINTING: Eliminate direct air drafts during application. Apply @ 500 sq ft/gal using a ¼” nap roller or a good China bristle brush. When using a roller, work out of a pan. Do not pour paint on floor and attempt to roil it. Increase airflow when paint is tack free. If a second coat is needed, allow first coat to dry for 24 hours then abrade with maroon pad and be sure the entire surface has been deglossed. Pay special attention to the edges where paint accumulates heavier along the tape.
PRECAUTIONS: Adverse drying conditions (low temperature, high humidity, heavy application) will delay curing time. Once solvents have evaporated, airflow and heat will aid in the curing process. Stir well before use. Applying paint on under cured surfaces can cause peeling or wrinkling. Screen paint well and tack with water before top coating. Pull tapes as soon as possible to prevent bonding sealer. Minimize orange peel effect in paint by not back-rolling.
GUARANTEE
We guarantee this PoloPlaz product to perform as advertised when applied in accordance with industry standards. Because surface preparation, application methods, and surface conditions are beyond our control, all express and implied warranties are explicitly excluded. Responsibility for claim of any kind is limited to product replacement only.
WARNING: This product can expose you to chemicals including Benzene, which is known to the state of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
DANGER
HAZARD STATEMENTS:
Flammable liquid and vapor
Causes skin irritation
May be fatal if swallowed and enters airways
Causes eye irritation
Suspected of causing cancer
PRECAUTIONARY STATEMENTS:
Keep out of reach of children
Read label before use
Do not handle until all safety precautions have been read and understood
Avoid breathing fume/dust/mist/vapors/spray
Get medical advice/attention if you feel unwell
In case of inadequate ventilation wear respiratory protection
Wear protective gloves/protective clothing/eye protection
Use only outside or in a well-ventilated area
Do not eat, drink, or smoke when using this product
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
Use only non-sparking tools
Take precautionary measures against static discharge
Wash hands thoroughly after handling
Keep container tightly closed
Store in a well-ventilated place. Keep cool
Store locked up
Dispose of contents/container in accordance with local/regional/national/international regulation
FIRST AID:
IF SWALLOWED: Immediately call a POISON CENTER/doctor/911
Do not induce vomiting
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower
IF INHALED: Remove person to fresh air and keep comfortable for breathing
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing
Avoid release to the environment
V.O.C < 545 g/l.
- PRODUCT DESCRIPTION
- TECHNICAL SPECIFICATIONS
- SDS
- TDS
- DIRECTIONS
Features:
- Because of the high urethane content, Fast Break Paint dries like a finish , eliminating costly drying delays.
- With its high pigment concentration, Fast Break Paint provides excellent coverage (hide) in most cases.
- Excellent hardness and low viscosity, Fast Break Paint will apply evenly and dry to a thin film.
- Allows for “breaking” at the cracks to reduce chipping and peeling.
Application
- Screen floor with 120 or 150 grit.
- Tack with water and allow to dry.
- Tape lines.
- Apply paint at 500 sf/gal.
- Peel tape and allow edges to dry.
- Abrade and apply top coats.
Formulation:
- Solids: 67% – 70%
- VOC’s: <450 g/L
- Flash Point: > 101 F
- Solvent: Petroleum Distillates
- Shelf Life: 6 Months Maximum
Tips:
- Apply with brush or 1/4 inch nap roller.
- Control temperature and humidity in facility to avoid excessive wood movement.
1 Quart, 1 Gallon And 5 Gallon Containers
All colors shown are approximations. Final results may vary. For exact color matches, please contact us.
| VOC | 450 gr/L |
| Solids | 69% |
| % Volatile | n/a |
| Flash Point | 105F |
| Dry Time | 12 hours |
| Cure Time | n/a |
| Coverage | 500 sq ft/gal |
| Open Time | 10 min |
| Sward Hardness | n/a |
| Color | varies |
DISPOSAL: Rags, steel wool and other waste soaked with oil finishes may spontaneously catch fire if improperly discarded. Dispose of rags and waste products in a sealed metal container or in accordance with local government and fire regulations. To avoid spontaneous combustion, do not allow dust from abraded or sanded floors to accumulate in piles, trash cans, vacuum cleaners, etc. Never leave dust or shavings in any other container inside a facility overnight.
STORAGE: Store at room temperature. Do not store above 120˚ F. Protect from freezing. If frozen, thaw at room temperature without stirring, and then stir before using. Keep container in upright position and tightly closed when storing.
PREPARATION: Ensure sealer has completely dried, thoroughly abraded, and free of dust and debris. Tape game lines using 3M #2090 for curved lines and #2080 for straight lines. Roll tape well to prevent bleed under.
Stir paint well and mix all same colors together for color consistency.
PAINTING: Eliminate direct air drafts during application. Apply @ 500 sq ft/gal using a ¼” nap roller or a good China bristle brush. When using a roller, work out of a pan. Do not pour paint on floor and attempt to roil it. Increase airflow when paint is tack free. If a second coat is needed, allow first coat to dry for 24 hours then abrade with maroon pad and be sure the entire surface has been deglossed. Pay special attention to the edges where paint accumulates heavier along the tape.
PRECAUTIONS: Adverse drying conditions (low temperature, high humidity, heavy application) will delay curing time. Once solvents have evaporated, airflow and heat will aid in the curing process. Stir well before use. Applying paint on under cured surfaces can cause peeling or wrinkling. Screen paint well and tack with water before top coating. Pull tapes as soon as possible to prevent bonding sealer. Minimize orange peel effect in paint by not back-rolling.
GUARANTEE
We guarantee this PoloPlaz product to perform as advertised when applied in accordance with industry standards. Because surface preparation, application methods, and surface conditions are beyond our control, all express and implied warranties are explicitly excluded. Responsibility for claim of any kind is limited to product replacement only.
WARNING: This product can expose you to chemicals including Benzene, which is known to the state of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
DANGER
HAZARD STATEMENTS:
Flammable liquid and vapor
Causes skin irritation
May be fatal if swallowed and enters airways
Causes eye irritation
Suspected of causing cancer
PRECAUTIONARY STATEMENTS:
Keep out of reach of children
Read label before use
Do not handle until all safety precautions have been read and understood
Avoid breathing fume/dust/mist/vapors/spray
Get medical advice/attention if you feel unwell
In case of inadequate ventilation wear respiratory protection
Wear protective gloves/protective clothing/eye protection
Use only outside or in a well-ventilated area
Do not eat, drink, or smoke when using this product
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
Use only non-sparking tools
Take precautionary measures against static discharge
Wash hands thoroughly after handling
Keep container tightly closed
Store in a well-ventilated place. Keep cool
Store locked up
Dispose of contents/container in accordance with local/regional/national/international regulation
FIRST AID:
IF SWALLOWED: Immediately call a POISON CENTER/doctor/911
Do not induce vomiting
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower
IF INHALED: Remove person to fresh air and keep comfortable for breathing
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing
Avoid release to the environment
V.O.C < 545 g/l.
