Sampson Craftsman’s Choice Quick Dry Poly Sealer
Fast Drying Polyurethane Sealer That Can Be Also Used As A 3 Coat Finishing Application
Sampson Craftsman’s Choice Quick Dry Poly Sealer is formulated with pure polyurethane oil for a clear color. This quick drying (1 hour to screen on bare wood) promotes intercoat adhesion and can be used as a sealer with a top coat or can be used by itself in a three coat application.
BRAND
APPLICATION
BASE
- Fast Drying – Dry To The Touch In 15 Minutes, Can Be Screened On Bare Wood In One Hour
- Promotes Intercoat Adhesion
- Can Be Used By Itself In A 3 Coat Application
- Available In 550 VOC, In 1 Gallon And 5 Gallon Sizes
| Item Number | Size | Sheen | VOC | Coverage Rate | Dry Time |
|---|---|---|---|---|---|
| SC16405001 | 1 Gal | Sealer | 550 | 600sq ft/gal | 1 Hr |
| SC16405005 | 5 Gal | Sealer | 550 | 600sq ft/gal | 1 Hr |
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
DANGER. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Causes eye irritation and serious eye damage. Causes skin irritation. Harmful if absorbed through skin or inhaled. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Do not breathe vapors, spray mist, dust or chips from sanding. Avoid contact with skin, eyes or clothing. While spraying paint, or sanding surface, wear a mask or respirator approved by the National Institute for Occupational Safety and Health. Wear protective clothing (long sleeved cotton shirt, long pants, hat, gloves (such as nitril or butyl). Shoes and socks. Wash thoroughly with soap and water after handling and before eating, drinking, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse. Use adequate ventilation.
Reports have associated repeated and prolonged exposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Follow manufacturer’s instructions for cleaning/maintaining Personal Protection Equipment (PPE). If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
FIRST AID
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Call a poison control center or doctor for treatment advice.
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Never give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth to mouth, if possible. Call a poison control center or doctor immediately for further treatment advice. For additional information in case of emergency call toll free Chemtrec – 1-800-424-9300. Have the product container or label with you when calling a poison control center or doctor or going for treatment.
PHYSICAL AND CHEMICAL HAZARDS (STORAGE)
Do not use or store near heat, sparks or open flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone.
Spill: Absorb with inert and dispose of as specified under “Clean Up”.
Clean Up: Mineral Spirits. To avoid spontaneous combustion, soak soiled rags and waste immediately after use in water-filled, closed metal container.
IMPORTANT STORAGE AND DISPOSAL-DANGER! Rags, steel wool or waste soaked with the product may spontaneously catch fire if improperly discarded. Immediately after use place the rags, steel wool or waste in sealed water-filled metal container. Do not store unused product inside the home.
Disposal: This product contains organic solvents which may cause adverse effects to the environment if handled improperly. Empty containers may retain residue. Follow label warnings even after the container is emptied. Residual vapor may explode on ignition. For disposal guidance, contact your sanitation department or State-designated environmental agency.
Refer to Safety Date Sheet for additional health and safety information.
KEEP OUT OF THE REACH OF CHILDREN
SURFACE PREPARATION: All surfaces must be clean and free of wax, oils, sawdust, dirt, grease and contaminants. Previously coated surfaces must be in sound, re-coatable condition.
WARNING: If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
STAIN: If desired use Sampson 029 Series Oil Stains, following manufacturer’s instructions.
APPLICATION: Do not shake or stir excessively. Apply with a clean, China bristle brush, lamb’s wool applicator, or mohair roller. Sand/screen between coats according to NOFMA Standards. Remove dusts and residues by vacuuming and/or tack cloth.
SEALING: Ready to use, no thinning required. Normal drying conditions at 77°F & 50% R.H. is 2-3 hours to touch, 3-5 hours to hard, and 3-4 hours to overnight to sand or recoat. Coverage is approximately 500-600 square feet/gallon over bare wood.
TOP COATING: If top coating longer than 72 hours after applying Sampson’s Quick Dry Sealer it is recommended to give the surface a light sanding/scuffing to eliminate any possible inter coat adhesion problems.
PRECAUTIONS: Low temperature, high humidity, heavy application and excessive film build will extend drying times. Carpets or rugs should not be placed on floor for at least one week.
WARRANTY
The manufacturer warrants that this coating will perform as described, when applied according to application instructions, at a spreading rate not to exceed the recommended maximum rate. If this paint fails to perform as described, the manufacturer or its distributor will furnish an equivalent amount of new product at no cost or will refund the purchase price upon proof of purchase. This warranty does not include labor or cost of labor for the application of any coating. This limited warranty gives you specific legal rights, and you may have other rights, which vary from state to state.
MAXIMUM VOC CONTENT: 550 grams/liter
