PoloPlaz NSB Gold Waterborne Sealer
Save time with this fast-drying formula.
PoloPlaz NSB Gold Sealer is a commercial-grade, waterborne sealer designed for use on new floors requiring waterborne seal and finish. The fast-drying formula enables multiple applications in one day. This high-build sealer allows your finish coats to really stand out – meaning more customer referrals for you.
BRAND
APPLICATION
BASE
- Reduces risk of damage from panelization
- Warm amber tone
- Use with Express, Polo 1K or FastTrak
Use For:
- New Installation to reduce risk of damage from panelization
- Hardwood Sports Floors, Malls, Restaurants, Offices, Museums
- High-Traffic Areas
- Preserving natural color of wood
Application:
- Apply two coats of NSB
- Use T-bar @ 500 sq ft/gal
- Allow 2-4 hrs between coats
- Abrade, tape lines, & paint
- Abrade and apply 3rd coat NSB
- Apply one coat of FastTrak
Formulation:
- Solids: 30%
- VOC’s: <275 g/L
- Flash Point: N/A
- Solvent: Water, Glycol Ethers
- Shelf Life: 1 year
Tips:
- Never use steel wool with waterborne products.
- Control temperature and humidity in facility to avoid excessive wood movement.
Available In 1 Gallon And 5 Gallon Containers
| VOC | 273 g/L |
| Solids | 30% |
| % Volatile | 70% |
| Flash Point | n/a |
| Dry Time | 2-4 hours |
| Cure Time | n/a |
| Coverage | 500 sf/gal |
| Open Time | 10 min |
| Sward Hardness | Pencil 2H |
| Color |
DESCRIPTION: Waterborne sealer designed for residential, commercial, and gym floors.
PRECAUTIONS: To avoid spontaneous combustion, do not allow dust from abraded or sanded floors to accumulate in piles, trash cans, vacuum cleaners, etc. Never leave dust or shavings in any container inside a facility overnight. Do not use steel wool on seal, paint, or finish when using waterborne products. Low temp, high humidity, and heavy application will extend dry time. Store at room temp. Avoid freezing. If frozen, slowly return to room temperature without stirring, then stir once product has completely liquefied. Keep container tightly closed and upright when not in use to prevent leakage. Before using this product on new gym floors, consult PoloPlaz about the risk of side-bonding and panelization. Tools and spills may be easily cleaned up with water. Wash hands with soap and water after use.
INSTRUCTIONS:
Commercial/Residential Floors
Final screen with 120 or 150 grit and vacuum thoroughly. On raw wood, apply first coat of NSB with a T-bar @ 500 sf/gal. Product will soak in quickly. Allow first coat to dry 2 – 4 hrs. Apply second coat at same rate and allow to dry overnight. Next day, abrade with 3M SPPs with 180 grit disks. Vacuum floor and tack with towels lightly dampened with water. Allow to thoroughly dry before top coating with PoloPlaz finish. On stained floors, apply PoloPlaz stain according to instructions on stain label. Allow overnight dry. Next, apply two coats of NSB Sealer and allow 2 – 4 hrs dry time between coats. If applying second coat next day, abrade first coat with 3M SPPs with 180 grit disks.
Gym Floors
On new installs, apply a layer of felt paper over the sub-floor to prevent the maple floor from bonding to it. Install and sand maple according to MFMA procedures. Apply first coat of NSB with a T-bar @ 500 sf/gal. Product will soak in quickly. Allow first coat to dry 2 – 4 hrs. Apply second coat at same rate and allow to dry overnight. Next day, abrade with 150 grit screens or SPPs with 180 grit strips. Vacuum floor and tack with towels lightly dampened with water. Allow to thoroughly dry before taping and painting game lines (see instructions for PoloPlaz Paint). Apply third coat of NSB and once film has set up, ventilate adequately to remove excess moisture from the air. This will assist in the drying and curing process. Relative humidity inside facility should be below 70% before application of finish. Apply first coat of PoloPlaz finish per instructions on the finish containers.
GUARANTEE
We guarantee this PoloPlaz product to perform as advertised when applied in accordance with industry standards. Because surface preparation, application methods, and surface conditions are beyond our control, all express and implied warranties are explicitly excluded. Responsibility for claim of any kind is limited to product replacement only.
DANGER
HAZARD STATEMENTS:
Causes skin irritation
Causes serious eye irritation
May cause respiratory irritation
Harmful if swallowed
May cause drowsiness or dizziness
PRECAUTIONARY STATEMENTS:
Keep out of reach of children
Read label before use
Obtain special instructions before use
Avoid breathing fume/dust/mist/vapors/spray
If exposed or concerned: Get medical advice/attention
Wear protective gloves/protective clothing/eye protection
Use only outside or in a well-ventilated area
Do not eat, drink, or smoke when using this product
Wash hands thoroughly after handling
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulation
Do not handle until all safety precautions have been read and understood
FIRST AID:
IF ON SKIN: Wash with plenty of soap and water
IF SKIN IRRITATION PERSISTS: Get medical advice/attention
Take off contaminated clothing and wash before reuse
IF INHALED: Remove person to fresh air and keep comfortable for breathing
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing
If eye irritation persists: Get medical advice/attention
Call a poison center/doctor/if you feel unwell
V.O.C < 275 g/l.
