• Stain and Sealer in One
• Dries in 2 hours/Recoat faster
• Low-odor, easy to use
• Available in 10 colors, can be intermixed
• Compatible with all Absco oil-modified and waterborne technologies

Absco Quick Dry Penetrating Wood Finish – Country White

Absco Quick Dry Penetrating Wood Finish – Neutral

Absco Quick Dry Penetrating Wood Finish – Provincial

Absco Quick Dry Penetrating Wood Finish – Antique Brown

Absco Quick Dry Penetrating Wood Finish – Ebony

Absco Quick Dry Penetrating Wood Finish – Dark Walnut

Absco Quick Dry Penetrating Wood Finish – Silvered Gray

Absco Quick Dry Penetrating Wood Finish – Flaxen

Absco Quick Dry Penetrating Wood Finish – Tobacco Smoke

Absco Quick Dry Penetrating Wood Finish – Golden Oak – SDS coming soon

Absco Quick Dry Penetrating Stain

This deep penetrating wood finish is a high quality, easy to use product that glides on smoothly and evenly leaving a beautiful rich color to most any type of wood. If you are refinishing a previously finished surface, prepare your wood by removing the old finish or stain to achieve a smooth, clean, bare wood surface.

APPLICATION

• Always test stain on a hidden area of the wood to ensure desired color.
• Prepare the floor according to NWFA best practices. Finish the sanding process with a 100# grit screen, then vacuum and tack to remove dust.
• Can be applied with either clean lint free cloth, 3/8” nap mohair (lint free) roller cover, a good quality brush or buffer and white pad.
• Recommended drying and recoat times of 2-3 hours are based upon optimal conditions of 77˚ F and 50% RH and good air circulation. Conditions other than these will extend drying and recoat times. Some wood fillers will not accept stain. Test before application.
• Remove excess glue from joints. Most glues will not accept stain. Soft woods may require a second stain coat to provide a more even stain appearance. If a lighter shade of stain is required, mix with Absco #10 Neutral.

1. Stir the stain thoroughly with a flat paddle to ensure an even color. Stir occasionally during use.
2. Brush on stain or wipe on with a clean cloth in the direction of the wood grain. Don’t let excess stain “puddle”. Allow stain to penetrate in to the wood for 2-5 minutes.
3. With a clean lint free cloth, remove excess stain, wiping with the grain of the wood. Remove excess stain well to assure top-coat adhesion.
4. Dispose of application rags, rollers and stain-soaked items in a sealed pail of water and dispose according to local regulations. Rags and other waste soaked with this product may spontaneously catch fire if not properly discarded.
5. For long lasting protection and to further beautify wood surfaces, use any Absco oil-based or water-based finish.

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NOISH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

DANGER: Contains mineral spirits. Combustible. Do not store or use near heat, sparks, flame or other ignition sources. Harmful or fatal if swallowed. Skin irritant. Avoid contact with skin and eyes. Wear rubber gloves and safety glasses when handling. To avoid breathing of vapors or spray mist, open windows and doors or use any means to ensure fresh air entry during application or drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MS HA TC23C or equivalent) or leave the area. Close container after each use. Do not smoke during application and until all vapors (odors) are gone. To avoid spontaneous combustion during temporary storage, soak soiled rags and waste immediately after use in a water-filled closed metal container.

USE ONLY WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN.

FIRST AID: If swallowed: Do not induce vomiting. Call physician immediately.

FOR SKIN CONTACT: Wash thoroughly with soap and water. If irritation persists, get medical attention.

FOR EYE CONTACT: Flush eyes with water IMMEDIATELY! Then remove any contact lenses. Continue flushing with water for at least 15 minutes. If irritation continues get medical attention.

INHALATION: If affected immediately seek fresh air. If symptoms persist, get medical attention.

NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Solvent – Non photochemically reactive.

WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Factors beyond our control prevent us from assuming responsibility for damage to property or person, even when this product is applied according to directions. In no event shall our liability exceed the purchase price hereof.

DANGER! COMBUSTIBLE, HARMFUL OR FATAL IF SWALLOWED, CALL A PHYSICIAN IMMEDIATELY.