Absco Grand NXTGEN TRS Sealer
A Waterborne Sealer That Is Great For New Installations
Introducing Absco Grand NXTGEN TRS Sealer, designed for use on new floors requiring waterborne seal and finish. Absco Grand NXTGEN TRS Sealer prevents damage to the wood from sidebonding and buffs out smoothly. Also great as the first coat for screen and recoats, can be used with 100% water or oil-based systems, has excellent flow without streaking or bubbling, and has a 3- hour dry time. Absco Grand NXTGEN TRS Sealer is VOC compliant NATIONALLY!
BRAND
APPLICATION
BASE
- Tannin Resistant Sealer
- Easy Application
- Very Low Odor
- Exceptional Leveling
- 3 Hour Dry Time
- Apply 2 Coats Per Day
- Use with 100% Water or Oil-Based Systems
- Excellent Flow, No Streaking or Bubbling
- Single Component
| Item Number | Size | Sheen | VOC | Coverage Rate | Dry Time |
|---|---|---|---|---|---|
| 93111 | 1 Gal | Sealer | 275 | 550 sq ft/gal | 3 Hrs |
| 93115 | 5 Gal | Sealer | 275 | 550 sq ft/gal | 3 Hrs |
ABSCO NXTGEN TRS Sealer is the latest technology in environmentally compliant wood floor sealers. ABSCO’s high quality Waterborne sealer is designed for residential, commercial and sport gym floors, and ready to sand in 2 – 4 hours, when applied according to directions.
EASY TO APPLY: ABSCO NXTGEN TRS Sealer is easy to apply with tannin resistant characteristics.
SURFACE PREPARATION: Proper surface preparation is essential to achieve a high-quality finish.
INSTRUCTIONS: Commercial/Residential Floors: Final screen with 120 or 150 grit and vacuum thoroughly. On raw wood, apply first coat of Grand NXTGEN TRS Sealer with roller applicator or a T-bar @ 500 sf/gal. Product will soak in quickly. Allow first coat to dry 2 – 4 hrs. Apply second coat at same rate and allow to dry overnight. Next day, abrade with maroon pad with 180 grit disks. Vacuum floor and tack with towels lightly dampened with water. Allow to thoroughly dry before top coating with Absco finish. On stained floors, apply Absco stain according to instructions on stain label. Allow to dry completely. Next, apply two coats of Grand NXTGEN TRS Sealer and allow 2 – 4 hours dry time between coats. If applying second coat next day, abrade first coat with maroon pad with 180 grit disks.
NEW OR NEWLY SANDED FLOORS: Make several passes with the sandpaper, increasing the paper fineness with each pass. The final pass before application of ABSCO Grand NXTGEN should be with 120 or 150 grit screen disc or sandpaper. Remove dust completely by sweeping, vacuuming, and wiping the floor with a lint free cloth lightly dampened with mineral spirits.
THINNING INSTRUCTIONS: ABSCO products are ready to use from the can, no thinning necessary.
APPLICATION: When applying ABSCO products over a stain, make sure that the stain has dried properly. Check the directions on the stain package, as different brands will have different drying times. Most oil-based stains would require a minimum of 24 hours before top coating. Apply ABSCO products with the grain of the wood. After ABSCO has dried, screen the floor with a 150-grit screen disc or 180 grit sandpaper strip on maroon pad between coats.
DRYING TIME: When applied according to directions, ABSCO Grand NXTGEN TRS should be ready to sand in just 2 – 4 hours. Heavy sealer application, high humidity, or lack of air flow will extend drying times.
COVERAGE: 500 sq. feet per gallon.
CLEAN-UP: Use warm water to clean brushes and applicators.
WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
WARNING. May cause allergic skin reaction. Do not breathe vapors, spray mist, dust or chips from sanding. Avoid contact with skin, eyes or clothing. While spraying paint, or sanding surface, wear a mask or pesticide respirator approved by the National Institute for Occupational Safety and Health. Wear protective clothing (long sleeved cotton shirt, long pants, hat, gloves (such as nitril or butyl). Shoes and socks. Wash thoroughly with soap and water after handling and before eating, drinking, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse. Use in well-ventilated area.
Follow manufacturer’s instructions for cleaning/maintaining Personal Protection Equipment (PPE). If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
FIRST AID
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Call a poison control center or doctor for treatment advice.
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Never give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately; wash with soap and water. Rinse with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth to mouth, if possible. Call a poison control center or doctor immediately for further treatment advice. For additional information in case of emergency call toll free Chemtrec – 1-800-424-9300. Have the product container or label with you when calling a poison control center or doctor or going for treatment.
PHYSICAL AND CHEMICAL HAZARDS (STORAGE)
Store locked up and well-ventilated area.
KEEP FROM FREEZING. DO NOT THIN.
SPILL: Absorb with inert and dispose of as specified under “Clean Up”.
CLEAN UP: Soap and Water.
DISPOSAL: Empty containers may retain residue. Follow label warnings even after the container is emptied. To dispose of contaminated absorbent, container and unused contents contact your sanitation department or State-designated environmental agency.
Refer to Safety Data Sheet for additional health and safety information.
KEEP OUT OF REACH OF CHILDREN
INGREDIENTS: 1-Methoxy-2-propanol (107-98-2), Water (7732-18-5), 1-(2-butoxy-1-methylethoxy)propan-2-ol (29911-28-2).
FACTORS BEYOND OUR CONTROL PREVENT US FROM ASSUMING RESPONSIBILITY FOR DAMAGE TO PROPERTY OR PERSON, EVEN WHEN THIS PRODUCT IS APPLIED ACCORDING TO DIRECTIONS. IN NO EVENT SHALL OUR LIABILITY EXCEED THE PURCHASE PRICE HEREOF.
THIS PRODUCT HAS A MAXIMUM VOC OF 275 g/L.
FOR WOOD SUBSTRATES ONLY
